|
 |
|
 |
|
Global Water’s conductivity sensor is a rugged reliable water conductivity measuring device. The conductivity transmitter probe is molded to 25’ of marine grade cable, with lengths up to 500’ available upon request. The conductivity sensor output is 4-20 mA with a three wire configuration. The conductivity transmitter's electronics are completely encapsulated in marine grade epoxy within a stainless steel housing.
|
|
|
|
|
 |
|
lobal Water’s dissolved oxygen sensor is a rugged reliable water oxygen level measuring device. The dissolved oxygen transmitter is attached to 25’ of marine grade cable, with lengths up to 500’ available upon request. The dissolved oxygen sensor output is 4-20 mA with a three wire configuration. The dissolved oxygen transmitter's electronics are completely encapsulated in marine grade epoxy within a stainless steel housing. The dissolved oxygen sensor uses a removable shield and dissolved oxygen element for easy maintenance.
|
|
|
|
|
 |
|
LOW Ra-TOX® On-line TOXICITY analyzer
Unique Selling Points
- Continuous measurement of Toxicity from water with low BODst using fixed biomass
- No need for activated sludge
- Direct Toxicity measurement by using respiration rate (mg O2 /l.h)
Applications
- Toxicity monitoring for surface water
|
|
|
|
|
 |
|
Designed by water quality instrumentation professionals for water quality professionals: The Eureka Manta® multiprobe incorporates the finest technologies providing you with reliable and easy-to-use instrumentation. The Manta incorporates multiple sensors into one instrument. Since each instrument has memory built-in, they are extremely versatile and can be used for profiling or as a water quality datalogger.
Parameters:
* Temperature
* Conductivity
* ORP
* Turbidity
* Dissolved Oxygen
* pH
* Depth
* Vented Level
|
|
|
|
|
 |
|
|
Multiparameter Water Quality Meter
|
Global Water's U-10 multiparameter water quality meter brings laboratory accuracy and the ease of push-button operation to water quality measurement in the field. Six parameters can be measured : pH, temperature, dissolved oxygen, electrolytic conductivity, turbidity, and, salinity. Featuring a powerful sensor and state-of-the-artfunctions, the multiparameter water quality meter makes it easy to get highly reliable water quality data simply and quickly just by submersing the sensor in the water. The multiparemeter water quality meter is flexible enough to use for cheeking the quality of a broad range of water samples, from factory effluent to urban drainage, river water, lake and marsh water, aquatic culture tanks, agricultral water supplies, and sea water. The main unit is water resistant, so it can be used safely even in the rain.
|
|
|
|
|
 |
|
Ra-BOD® On-line BOD analyzer
Unique Selling Points
- Continuous use of sludge from the WWTP for measurement (same pH, same temperature, ongoing measurement even in case of toxicity)
- Direct BODst measurement by using respiration rate (mgO2/l.h) instead of O2 concentration using only oxygen electrode
- Time selectable BODst cycle
- Combination with toxicity measurement possible (see Ra-COMBO®)
Applications
- Influent monitoring
- Process monitoring
- Overload prevention monitoring
|
|
|
|
|
 |
|
Global Water’s ORP/Redux sensor is a rugged reliable ORP/Redux measuring device. The ORP transmitter probe is molded to 25’ of marine grade cable, with lengths up to 500’ available upon request. The ORP sensor's output is 4-20 mA with a three wire configuration. The ORP transmitter's electronics are completely encapsulated in marine grade epoxy within a stainless steel housing.
|
|
|
|
|
 |
|
Global Water’s pH sensor is a rugged reliable water pH measuring device. The pH transmitter is mounted on 25’ of marine grade cable, with lengths up to 500’ available upon request. The pH sensor output is 4-20 mA with a three wire configuration. The pH transmitter's electronics are completely encapsulated in marine grade epoxy within a stainless steel housing. The pH transmitter also uses a removable shield and replaceable pH sensor element for easy maintenance.
|
|
|
|
|
 |
|
Global Water's WL600 Sonic Water Level Meter is a self-contained, battery operated meter that uses sound waves to measure well water level. Fast, accurate measurements are possible in the field or anywhere, without the use of down-hole instrumentation. The water level meter is lightweight, compact, versatile, and easy to operate. The water level meter allows you to measure crooked wells, wells with cascading water, partially cased rock wells, wells with submersible pumps, capped or uncapped wells, wells with pipes and wires inside, in fact you can even measure the length of coiled pipe with the water level meter. As long as the obstructions take up no more than half of the bore area the meter will not suffer any loss of accuracy. The sonic water level meter should only be used on wells under 10 inches in diameter as the accuracy decreases with larger diameter wells.
|
|
|
|
|
 |
|
Global Water’s submersible temperature sensor is a rugged reliable water temperature measuring device. The temperature transmitter probe is molded to 25’ of marine grade cable, with lengths up to 500’ available upon request. The temperature sensor has a two wire configuration for minimum current draw. The temperature transmitter's electronics are completely encapsulated in marine grade epoxy within a stainless steel housing.
|
|
|
|
|
 |
|
Chemtrac's new TruTrac turbidimeter continuously monitors, records, and reports (integrated with SCADA) turbidity compliance data for municipal water filtration processes. The TM 2200 incorporates a sample degassing chamber and a removable flow cell to simplify unit calibration and maintenance. A local display prompts the user with calibration steps, diagnostic data, and immediate turbidity data without the need for a laptop or data recorder.
|
|
|
|
|
 |
|
Global Water's Sewage Lift Station Wastewater Level Sensor (WL430) is based on over 30 years of design and field service heritage, and comes with EXCLUSIVE LIFETIME WARRANTY against lightning strikes. The Sewage Lift Station Wastewater Level Sensor's “Steelcage” design offers the highest reliability in level measurement for severe high solids environments such as sewage, lift stations, storm canals, wet wells and slurry tanks. The waste water level transmitter system consists of a submersible pressure sensing element cased in a 316L SST housing. The lift station wastewater level sensor's electronics are capable of withstanding lightning strikes and meet RCTA/DO 160D for lightning direct effects and surge protection for FAA and MIL-STD test and NASA standard electrical surge requirements.
|
|
|
|
|
 |
|
Global Water's WS300 Composite Sampler is designed specifically to meet the sampling requirements for industrial discharges, sewers, rivers, and streams. The sampler takes a "time weighted"; composite sample in a 2 gallon bottle, and is designed to meet composite sampling guidelines. The WS300 Composite Sampler is easy to set up near industrial wastewater discharges or streams, and it can also be suspended in a manhole for sewer sampling. The Composite Sampler is enclosed in a rugged, rainproof, and lockable carrying container. Inside the container is a 2-gallon polyethylene sample bottle for collecting composite samples, a peristaltic sampling pump, a logic timer/controller, and a rechargeable gel cell battery. Also provided is a sample pickup hose and a battery charger. Everything you need is provided for a successful wastewater management or environmental monitoring program.
|
|
|
|
|
 |
|
Global Water's WL15X Water Level Logger provides a datalogger with a submersible pressure transducer for remote monitoring and recording of well depth measurements and water pressure data. This highly reliable and accurate water level recorder records 24,400 readings and is programmable from one reading per second to one reading per day. Ranges of 0-3', 0-15', 0-30', 0-60', 0-120' and 0-250' are available. A 25' cable is standard, and optional cable lengths are available up to 500'.
|
|
|
|
|
 |
|
Global Water's WL400 Water Level Sensor provides highly accurate water level measurement for a wide variety of applications, including those in severe environments. The submersible pressure transducers have a dynamic temperature compensation system, enabling high accuracy measurements over a wide temperature range. The water level sensor is easily adapted to all dataloggers, telemetry, monitoring equipment, and displays.
|
|
|
|
|
 |
|
Global Water's WL500 Well Level Sounder sets a new precision standard for well water level measurement. The Water Level Sounder meets or exceeds federal specification US GGG-T-106E (USA) or EEC CLASS II (Europe) for a guaranteed accuracy of 0.008%. The Water Level Sounder uses a full depth-rated stainless steel and teflon probe that is 5/8-inch (16 mm) in diameter. The water level sounder's sensor electronics are encapsulated in a water and dust proof housing. The flat spring steel core ensures that the level sounder will hang perfectly straight in large and small diameter wells. This provides unparalleled accuracy when compared to the flat white tapes, where kinks in the tape introduce slight errors, in addition to the displacement of water changing the static level.
|
|
|
|
|
Kenelec
Scientific Pty Ltd
ABN 88 064 373 717
23 Redland Drive, Mitcham, VIC, Australia 3132
Ph: +61 3 9873 1022 Fax: +61 3 9873 0200
Privacy Contact
About Links
|
|
|
|
