Home > Kenelec Products > All Products > Global Water > Ultrasonic Level Transmitters

Ultrasonic Level Transmitters - WL750

Ultrasonic Level Transmitters
Enlarge Image+

The WL750 Ultrasonic Level Transmitters are perfect for short range, non-contact tank level measurements for a variety of liquids and solids.  The Ultrasonic Level Transmitters feature an integrated LCD display and transmitter unit that provides a local level readout as well as the ability to send a signal to another device.  The Ultrasonic Level Transmitters offer user-programmable settings and, in addition to the displayed values, feature an LED alarm light.

With the Ultrasonic Level Transmitter's narrow 8 degree beam angle and slim 1.38 inches (35mm) chemical resistant process end, the WL750 is designed for accurate level measurement -- even in relatively small tanks.  A 3-bolt 2 ¾ inch flange is included with each Ultrasonic Level Transmitter for secure mounting.  The WL750 Ultrasonic Level Transmitter's power and signal cable assembly is connected to the display unit with a molded on, locking 5-pin plug.  Choose from 16 ft (5m) or 33 ft (10m) cable assemblies, or purchase just the 5-pin plug alone to create longer cable runs.

* *NOTE: A cable assembly or 5-pin plug is required for the ultrasonic level transmitter.

Features & Benefits

  • Integrated display & user interface
  • Compact chemical resistant body
  • User adjustable limits & alarm points
  • Scaleable 4-20mA signal output

Literature

Accessories

EZ Display

All of Global Water's electronic sensors seamlessly interface to the EZ100 Sensor Display, which can be used for both portable and permanent installations.  Global Water's EZ Display features a large LCD readout that can be configured to display 4-20mA electronic sensor output values in any engineering units.  The portable display is housed in a rugged, weatherproof enclosure that can be either hand held or wall mounted. More Information

EZ Display - EZ100

All of Global Water's electronic sensors seamlessly interface to the EZ100 Sensor Display, which can be used for both portable and permanent installations.  Global Water's EZ Display features a large LCD readout that can be configured to display 4-20mA electronic sensor output values in any engineering units.  The portable display is housed in a rugged, weatherproof enclosure that can be either hand held or wall mounted.

      Make Enquiry

      • Kenelec Scientific Headquarters
        23 Redland Drive, Mitcham, VIC, Australia 3132
        Ph: +61 3 9873 1022
        Fax: +61 3 9873 0200
      • National Freecall No.
        1300 73 2233
      • Kenelec Scientific NSW
        Building 5, 49 Frenchs Forest Road, Frenchs Forest NSW, Australia 2086
        Ph: +61 2 8977 4017
        Fax: +61 2 8977 4000