Home > Kenelec Products > Products > Gas Detection > Portable, Rapid Identification of Corrosion Hotspots

Portable, Rapid Identification of Corrosion Hotspots - Hydrosteel 6000

Portable, Rapid Identification of Corrosion Hotspots
Enlarge Image+

Hydrosteel 6000 is the ultimate portable monitoring tool for sour, HF and high temperature corrosion and diffusible hydrogen damage in steel.

The intrinsically safe instrument is totally non-intrusive and with minimal test surface preparation, and no consumables such as grease required, reliable measurements can be made within a minute.

Measurements can be taken from small pipes and large vessels, at any orientation and at any temperature up to 500 °C (932 °F), with a single probe.

Features & Benefits

  • Rapid, reliable and repeatable measurement of hydrogen flux
  • Operates on steel up to 500 °C
  • Accommodates surfaces from 3.5" diameter to flat
  • Operates in any orientation, e.g. at base of pipe and vessels where corrosion commonly occurs
  • Portable, light-weight
  • Simple to use
  • Intrinsically safe
  • Totally non-intrusive
  • Little or no test surface preparation needed
  • No consumables such as adhesives, liquids or greases required  

Applications

  • Measure active corrosion in steel pipes and vessels in petrochemical service at temperatures up to 500 °C
  • Hydrogen monitoring for industrial bakeout
  • Identify corrosion hot spots
  • Optimise corrosion control measures and inhibitor programs
  • HIC damage identification, assessment and control
  • Sour, HF acid and all high temperature corrosion monitoring
  • Risk based inspection of prospective hydrogen damage
  • Test the integrity of internal protective coatings
  • Optimise hydrogen bake outs and controlled cooling of large scale vessels

Included Items

  • Hydrosteel 6000 analyser with leather jacket
  • 1 years Gold Replacement Service
  • Hydrosteel 6000 user manual
  • Robust Peli field case to contain all components
  • LT-R probe for low temperature measurement
  • 1 m and 2 m LT-R gas sample conduit
  • LT-R poles and swivel joint for extended reach
  • LT-R replacement places x 2
  • HT-R probe for high temperature measurements
  • 2 m HT-R gas sample conduit
  • HT-R very HT conduit extension
  • HT-R replacement plates x 6
  • HT-R plate replacement wrench
  • HT-R plate fixing key
  • HT-R spanner (2)
  • IRDA link including power cables, mains adaptor, software and serial comms cable

Literature

      Make Enquiry

      • Kenelec Scientific Headquarters
        23 Redland Drive, Mitcham, VIC, Australia 3132
        Ph: +61 3 9873 1022
        Fax: +61 3 9873 0200
      • National Freecall No.
        1300 73 2233
      • Kenelec Scientific NSW
        Building 5, 49 Frenchs Forest Road, Frenchs Forest NSW, Australia 2086
        Ph: +61 2 8977 4017
        Fax: +61 2 8977 4000