Most TSI Thermal Anemometry probes are built with a plug-in connector. Thus, they require a probe support which serves to support the probe and provide an electrical connection to the anemometer. TSI probe supports come in a wide variety of configurations and lengths, for both single- and dual-sensor probes (standard three-sensor probes are designed with a probe support built-in), and for either gas or liquid flow applications. Right angle adapters, available for both single- and dual-sensor probes, allow probe mounting in an end flow orientation, even when the probe support is mounted in a cross flow arrangement. Totally immersible probe supports are also available for liquid flow applications.

---

Model 1155 Dual Sensor, Standard Probe Supports

Designed for most standard TSI dual-sensor, plug-in probes for gas flow applications, Model 1155 provides support and reliable electrical connection. Coaxial construction enables maximum frequency response. Designed for temperatures to 150°C. Comes in three lengths.

1155-6 1155-18 1155-36

For 152 mm (6 in.) length For 457 mm (18 in.) length For 915 mm (36 in.) length

 

---

Model 1165 Dual Sensor, Standard Probe Supports

Similar to the Model 1155, the Model 1165 is specifically designed to operate in gas flows with elevated temperature environments up to 300°C. Comes in two lengths.

1165-6                For 152mm (6in.) length
1165-18              For 457mm (18in.) length

---

Model 1156-1 Dual Sensor, Flexible Probe Support

Convenient support for small spaces and adaptable to many gas flow applications. Designed for temperatures to 150°C.

---

Model 1154-15 Dual Sensor, Immersible, Flexible Probe Support

Designed for use in small spaces and for immersion of entire probe for liquid flow applications

---

Model 1157 90° Angle Adapters for Dual Sensor Probes

Right-angle bend adds flexibility to probe system by providing access to upstream points with straight probes. Designed for temperatures to 150°C.