- Particle size range from 0.5 to 40 µm
- Bed of bronze beads breaks up powder agglomerates
- Stable output and concentration
|
- Generates 1- to 200-µm particles
- Includes everything you need
- Lets you produce the most monodisperse particles possible in a laboratory
|
- Generates 0.01- to 1.0-µm particles
- Includes everything you need to produce monodisperse, submicrometer particles
|
- Generates particles from 1 to 200 µm
- Particles are uniform in size, shape, density and surface characteristics
- Works with a variety of solutes and solvents
|
- Generates particles from 2 to 100 nm in diameter
- Particles are uniform in size and shape
|
The Model 348002 Aerosol Neutralizer is offered for use with our Model 3480 Electrospray Aerosol Generator.
|
- Dilution ratios of 100 to 1 or 20 to 1
- Higher ratios achieved by setting up two diluters in tandem
- Very low particle loss from 0.5 to 10µm
- Easy-to-change capillary tubes
|
Removes moisture from generated aerosols with minimal particle loss.
|
- Provides accurate measurements of electrical current and flow rate. It measures total net charge on aerosol particles from 0.002 to 5um
- The ideal instrument for the testing and calibration of particle instruments
- Provides particle concentration measurements
- All readings are in real time
|
Routes aerosol sample to up to four instruments at once.
|
Minimize particle losses and coagulation by electrostatic charges, and charge particles properly for size analysis or air-filter measurements.
|
The Process Aerosol Monitor (PAM) measures high-concentration, monodisperse aerosol, like that produced with our Model 3475 Condensation Monodisperse Aerosol Generator (CMAG) or other Sinclair-LaMer-type generators.
|
- Generates monodisperse particles from 0.1 to 8µm
- Produces concentrations >10 6 particles/cm3
- Produces liquid or solid particles from a variety of oils, waxes, and other materials
- Particles can be fluorescently or radioactively labeled
|
- Deagglomerates most dry particles in the range from 0.5 to 50µm
- Selection of turntables available to meet specific dispersion needs
- Use as an APS accessory for particle-size-distribution measurements
- Produces small quantities of powder by lifting particles from a turntable using a venturi aspirator
- The turntable rotates at variable speeds to control aerosol concentrations
- A selection of optional turntables is available to meet special needs
|
Controls the lower size cutoff of a TSI Condensation Particle Counter (CPC).
|
- Concentrations over 107 particles/cm3
- Nominal aerosol flow rate of 3.0 L/min
|
- Produces a high concentration of aerosol particles from 0.1 to 10 µm
- Produces potassium chloride (KCl) or other aerosols
- Meets the requirements of the proposed SAE J1669, ISO/CD 11155-1, and ASHRAE 52.2 test codes
- Works well for fractional efficiency tests of automotive-cabin air filters and general ventilation filters
|
- Collective particle-generation range from 2 to 1000 nm
- Recirculating sheath-air flow for ease of use
- Built-in, temperature- and pressure-corrected, NIST-traceable flow
- Fully adjustable flow-parameter settings allow selection of the desired particle size
- Platform design accommodates two different DMAs
- Compatible with SMPS systems
|
3375.pdf 111Kb