Home > Kenelec Products > All Products > TSI > Cylindrical, single sensor, cross flow

Cylindrical, single sensor, cross flow - Probes

 
Model 1211 Standard Probe
 
Designed for one component, cross-flow applications up to 150°C. The sensor is mounted parallel to the probe axis to minimize interference from the probe body and support needles. Available in hot wire and hot film versions for use in gas flows.
For Gas Flows For Liquid Flows Probe Supports Optional
1211-T1.5 Wire
1211-20 Film

1150
1151

1158 Shield
1139 Shield
1132 Shield

Model 1221 High Temperature Probe

 Designed for one component, cross-flow applications up to 300°C where the flow space is limited in size. The sensor is mounted parallel to the probe axis to minimize interference from the probe body and support needles. Available in hot wire and hot film versions for use in gas flows.
For Gas Flows For Liquid Flows Probe Supports Optional
1221-PI2.5 Wire
1221-20 Film
1160 1158 Shield
1139 Shield
1132 Shield

Model 1212 Standard Single Sensor Probe

Designed for one component, cross-flow applications. Right angle bend in the support needles positions the sensor upstream of the probe body to minimize disturbance by the probe body. Available in hot wire and hot film versions for gases (up to 150°C) and hot film version for liquids.
For Gas Flows For Liquid Flows Probe Supports Optional
1212-T1.5 Wire
1212-20 Film
1212-20W Film
1212-60W Film
1150
1151
1159

Model 1222 High Temperature Single Sensor Probe

Designed for one component, cross-flow applications up to 300°C. Right angle bend in the support needles positions the sensor upstream of the probe body to minimize disturbance by the probe body. Available in hot wire and hot film versions for gases.
For Gas Flows For Liquid Flows Probe Supports Optional
1222-PI2.5 Wire
1222-20 Film
1160

Model 1262A Miniature Probe

 Designed for one component, cross-flow applications. Right angle bend in the support needles and small diameter of the probe body minimize flow disturbances and make it ideal for difficult-to-reach locations. Available in hot wire and hot film versions for gases (up to 150°C) and hot film version for liquids.
For Gas Flows For Liquid Flows Probe Supports Optional
1262A-T1.5 Wire
1262A-10 Film
1262A-10W Film
1150
1151
1159

Model 1279 Subminiature Probe

Extremely small probe for very small test sections. Right angle bend in support needles and small diameter of the probe body minimize flow disturbances. Available in hot film version for gases (up to 150°C).
For Gas Flows For Liquid Flows Probe Supports Optional
1279-10A Film
1108

Model 1277 Subminiature Probe

Designed for minimal flow disturbance, sensor is upstream and parallel to probe body. Available in hot film version for gas applications up to 150°C.
For Gas Flows For Liquid Flows Probe Supports Optional
1277-10A Film
1108

Model 1218 Standard Boundary Layer Probe

 Designed for measuring very close to a surface with minimum flow disturbance. Has built-in pin to prevent sensor from contacting surface. Available in hot wire and hot film versions for gases, for use up to 150°C, and hot film version for liquids.
For Gas Flows For Liquid Flows Probe Supports Optional
1218-T1.5 Wire
1218-20 Film
1218-20W Film
1218-60W Film

1150
1151
1159

Model 1261A Miniature Boundary Layer Probe

 Useful for velocity gradient measurements very close to a surface with minimum flow disturbance. Has built-in pin to prevent sensor from contacting surface. Available in hot wire and hot film versions for gases, for use up to 150°C, and hot film version for liquids.
For Gas Flows For Liquid Flows Probe Supports Optional
1261A-T1.5 Wire
1261A-10 Film
1261A-10W Film

1150
1151
1159

 

Literature

Accessories

Temperature Module with Signal Conditioner

Module supplies the sensing current and signal conditioning needed to use a fine wire sensor as a resistance thermometer. Plugs into a standard TSI IFA300 research thermal anemometer. More Information

Single-channel SMARTTUNE Constant Temperature Anemometer - IFA300

  • SMARTTUNE automatic bridge optimization technology
  • High frequency response with no tuning
  • Built-in signal conditioner and thermocouple circuits
  • Fully computer-controlled
  • Ultra-low-noise circuits
  • Optional constant current anemometer
  • Optional integrated calibration system
  • Special 1:1 bridge for high frequency response

Temperature Module with Signal Conditioner - 183145

Module supplies the sensing current and signal conditioning needed to use a fine wire sensor as a resistance thermometer. Plugs into a standard TSI IFA300 research thermal anemometer.

Add-on SMARTTUNE CTA Module - 183150

SMARTTUNE™ CTA Module w/Signal Conditioner is the plug-in module for additional channels of anemometry

      Make Enquiry

      • Kenelec Scientific Headquarters
        23 Redland Drive, Mitcham, VIC, Australia 3132
        Ph: +61 3 9873 1022
        Fax: +61 3 9873 0200
      • National Freecall No.
        1300 73 2233
      • Kenelec Scientific NSW
        Building 5, 49 Frenchs Forest Road, Frenchs Forest NSW, Australia 2086
        Ph: +61 2 8977 4017
        Fax: +61 2 8977 4000