Home > Kenelec Products > Products > Particle Instruments > Engine Exhaust Spectrometer

Engine Exhaust Spectrometer - 3090

Engine Exhaust Spectrometer
Enlarge Image+

The Engine Exhaust Particle Sizer (EEPS™) spectrometer measures the size distribution of engine-exhaust particle emissions in the range from 5.6 to 560 nm with the fastest time resolution available. Users can visualize and study the dynamic behavior of particle emissions that occur during transient test cycles, during the first few seconds of a cold start, or during regeneration of a particle trap or diesel particulate filter (DPF).

The EEPS spectrometer displays measurements in 32 channels total (16 channels per decade). It operates over a wide particle concentration range, including down to 200 particles/cm3. It operates at ambient pressure to prevent evaporation of volatile and semi-volatile particles, and it requires no consumables.

Ease of operation is a key feature of this particle sizer. All components are housed in a single 32-kg cabinet that includes the vacuum source. A microprocessor measures temperature and barometric pressure automatically to convert to volumetric flow. The instrument includes features for remote operation and includes software that is unmatched in the industry.

Features & Benefits

  • Measures particles from 5.6 to 560 nm
  • 10-Hz data collection captures transient events in real time
  • Comprehensive software for data collection and analysis
  • Easy to use
  • Housed in a single cabinet that weighs just 32 kg
  • Four configurable analog outputs 

Applications

  • Engine-exhaust particle sizing

Included Items

  • Engine Exhaust Particle Sizer software

Literature

Accessories

Particle Size Selector

Controls the lower size cutoff of a TSI Condensation Particle Counter (CPC). More Information

Small-Scale Powder Disperser - 3433

  • Deagglomerates most dry particles in the range from 0.5 to 50µm
  • Selection of turntables available to meet specific dispersion needs
  • Use as an APS accessory for particle-size-distribution measurements
  • Produces small quantities of powder by lifting particles from a turntable using a venturi aspirator
  • The turntable rotates at variable speeds to control aerosol concentrations
  • A selection of optional turntables is available to meet special needs 

Condensation Monodisperse Aerosol Generator - 3475

  • Generates monodisperse particles from 0.1 to 8µm
  • Produces concentrations >10 6 particles/cm3
  • Produces liquid or solid particles from a variety of oils, waxes, and other materials
  • Particles can be fluorescently or radioactively labeled

Particle Size Selector - 376060

Controls the lower size cutoff of a TSI Condensation Particle Counter (CPC).

Fluidized Bed Aerosol Generator - 3400A

  • Particle size range from 0.5 to 40 µm
  • Bed of bronze beads breaks up powder agglomerates
  • Stable output and concentration 

Supermicrometer Monodisperse Aerosol Generation System - 3941

  • Generates 1- to 200-µm particles
  • Includes everything you need
  • Lets you produce the most monodisperse particles possible in a laboratory 

Submicrometer Monodisperse Aerosol Generation System - 3940

  • Generates 0.01- to 1.0-µm  particles
  • Includes everything you need to produce monodisperse, submicrometer particles 

Electrospray Aerosol Generator - 3480

  • Generates particles from 2 to 100 nm in diameter
  • Particles are uniform in size and shape

Aerosol Neutralizers - 348002

The Model 348002 Aerosol Neutralizer is offered for use with our Model 3480 Electrospray Aerosol Generator.

Aerosol Diluter - 3302A

  • Dilution ratios of 100 to 1 or 20 to 1
  • Higher ratios achieved by setting up two diluters in tandem
  • Very low particle loss from 0.5 to 10µm
  • Easy-to-change capillary tubes 

Diffusion Dryer - 3062

Removes moisture from generated aerosols with minimal particle loss.

TSI 3068B Aerosol Electrometer

  • Provides accurate measurements of electrical current and flow rate. It measures total net charge on aerosol particles from 0.002 to 5um
  • The ideal instrument for the testing and calibration of particle instruments
  • Provides particle concentration measurements
  • All readings are in real time

Flow Splitter - 3708

Routes aerosol sample to up to four instruments at once.

Aerosol Neutralizers - 3012

Minimize particle losses and coagulation by electrostatic charges, and charge particles properly for size analysis or air-filter measurements.

Six-jet Atomizer - 9306

  • External control for selecting up to six atomizer jets
  • External control of dilution air flow rate to adjust output concentrations and dry solid particles
  • Generates and expels particles into pressurized
  • Generation of polydisperse aerosols in high concentrations environments 

Ultrafine Particle Monitor - 3031

Provides continuous size distribution and number concentration data for long-term, air quality monitoring

Environmental Sampling System - 3031200

Particle Saver group

Vibrating Orifice Aerosol Generator - 3450

  • Generates particles from 1 to 200 µm
  • Particles are uniform in size, shape, density and surface characteristics
  • Works with a variety of solutes and solvents

Atomizers - 3076

  • Concentrations over 107 particles/cm3
  • Nominal aerosol flow rate of 3.0 L/min

Large-Particle Aerosol Generator - 8108

  • Produces a high concentration of aerosol particles from 0.1 to 10 µm
  • Produces potassium chloride (KCl) or other aerosols
  • Meets the requirements of the proposed SAE J1669, ISO/CD 11155-1, and ASHRAE 52.2 test codes
  • Works well for fractional efficiency tests of automotive-cabin air filters and general ventilation filters

Electrostatic Classifiers and Differential Mobility Analyzers - 3080L

  • Collective particle-generation range from 2 to 1000 nm
  • Recirculating sheath-air flow for ease of use
  • Built-in, temperature- and pressure-corrected, NIST-traceable flow
  • Fully adjustable flow-parameter settings allow selection of the desired particle size
  • Platform design accommodates two different DMAs
  • Compatible with SMPS systems

      Make Enquiry

      • Kenelec Scientific Headquarters
        23 Redland Drive, Mitcham, VIC, Australia 3132
        Ph: +61 3 9873 1022
        Fax: +61 3 9873 0200
      • National Freecall No.
        1300 73 2233
      • Kenelec Scientific NSW
        Building 5, 49 Frenchs Forest Road, Frenchs Forest NSW, Australia 2086
        Ph: +61 2 8977 4017
        Fax: +61 2 8977 4000