Home > Kenelec Products > All Products > TSI > Manual Velocity Calibrator with Pressure Transducer

Manual Velocity Calibrator with Pressure Transducer - 1128

Manual Velocity Calibrator with Pressure Transducer
Enlarge Image+

The TSI Model 1128 Manual Velocity Calibrator is a lower cost version of the Calibrator available for use with the popular IFA 300 research anemometer. It can be used with any anemometer and with a wide range of thermal anemometry probe types and sizes.

The Model 1128 calibrator offers several advanced features. For one, its exclusive flow nozzle design exhibits a flat velocity profile over a broad dynamic range. For another, it has a probe mounting system that handles any type of probe and probe support with the utmost positioning flexibility, essential for yaw and pitch calibrations.

The user has a choice of three pressure transducers for use with this calibrator: 0 to 10 mm Hg, 0 to 100 mm Hg, or 0 to 1000 mm Hg for velocity ranges of 0.05 to 50 m/s, 0.15 to 140 m/s, or 0.5 m/s to Mach 1, respectively.

 

Features & Benefits

  • Works with one-, two-, or three-sensor probes
  • Probe mounts for yaw/pitch calibration
  • Works with any thermal anemometer
  • Accepts a wide range of thermal anemometry probes and probe supports
  • Choice of three pressure transducers
 

Applications

  • General purpose thermal anemometry probe calibration

Accessories

Temperature Module with Signal Conditioner

Module supplies the sensing current and signal conditioning needed to use a fine wire sensor as a resistance thermometer. Plugs into a standard TSI IFA300 research thermal anemometer. More Information

Single-channel SMARTTUNE Constant Temperature Anemometer - IFA300

  • SMARTTUNE automatic bridge optimization technology
  • High frequency response with no tuning
  • Built-in signal conditioner and thermocouple circuits
  • Fully computer-controlled
  • Ultra-low-noise circuits
  • Optional constant current anemometer
  • Optional integrated calibration system
  • Special 1:1 bridge for high frequency response

Temperature Module with Signal Conditioner - 183145

Module supplies the sensing current and signal conditioning needed to use a fine wire sensor as a resistance thermometer. Plugs into a standard TSI IFA300 research thermal anemometer.

Add-on SMARTTUNE CTA Module - 183150

SMARTTUNE™ CTA Module w/Signal Conditioner is the plug-in module for additional channels of anemometry

      Make Enquiry

      • Kenelec Scientific Headquarters
        23 Redland Drive, Mitcham, VIC, Australia 3132
        Ph: +61 3 9873 1022
        Fax: +61 3 9873 0200
      • National Freecall No.
        1300 73 2233
      • Kenelec Scientific NSW
        Building 5, 49 Frenchs Forest Road, Frenchs Forest NSW, Australia 2086
        Ph: +61 2 8977 4017
        Fax: +61 2 8977 4000