Home > Kenelec Products > Accessories > TSI

TSI

Products > Accessories > TSI

Electrostatic Classifiers and Differential Mobility Analyzers - 3080L

  • Collective particle-generation range from 2 to 1000 nm
  • Recirculating sheath-air flow for ease of use
  • Built-in, temperature- and pressure-corrected, NIST-traceable flow
  • Fully adjustable flow-parameter settings allow selection of the desired particle size
  • Platform design accommodates two different DMAs
  • Compatible with SMPS systems

Impactor Inlet - 3306

Collects a size-segregated sample for analysis while making measurements with an Aerodynamic Particle Sizer spectrometer.

Photodetector Modules for Velocity and Size - PDM1000-1P

TSI's Photo-Detector Module (PDM) combines an interchangeable optics block with ultra-sensitive photodetectors for maximum ease-of-use and highest performance LDV/PDPA operation.

25mm Diameter 1-Component Transceiver Probe - TR 120

The TR120 Transceiver Probe provides the ability to make velocity measurements in difficult to access situations. The probe is compact, sealed, rugged, and operates in the backscatter mode, with receiving optics built in.

25mm Diameter 2-Component Transceiver Probe - TR 220

The TR220 Transceiver Probe provides the ability to make 2D velocity measurements in difficult to access situations. The probe is compact, sealed, rugged, and operates in the backscatter mode, with receiving optics built in.

Small-Scale Powder Disperser - 3433

  • Deagglomerates most dry particles in the range from 0.5 to 50µm
  • Selection of turntables available to meet specific dispersion needs
  • Use as an APS accessory for particle-size-distribution measurements
  • Produces small quantities of powder by lifting particles from a turntable using a venturi aspirator
  • The turntable rotates at variable speeds to control aerosol concentrations
  • A selection of optional turntables is available to meet special needs 

Aerosol Diluter - 3302A

  • Dilution ratios of 100 to 1 or 20 to 1
  • Higher ratios achieved by setting up two diluters in tandem
  • Very low particle loss from 0.5 to 10µm
  • Easy-to-change capillary tubes 

Submicrometer Monodisperse Aerosol Generation System - 3940

  • Generates 0.01- to 1.0-µm  particles
  • Includes everything you need to produce monodisperse, submicrometer particles 

Supermicrometer Monodisperse Aerosol Generation System - 3941

  • Generates 1- to 200-µm particles
  • Includes everything you need
  • Lets you produce the most monodisperse particles possible in a laboratory 

Condensation Monodisperse Aerosol Generator - 3475

  • Generates monodisperse particles from 0.1 to 8µm
  • Produces concentrations >10 6 particles/cm3
  • Produces liquid or solid particles from a variety of oils, waxes, and other materials
  • Particles can be fluorescently or radioactively labeled
1
2 3 4 5 6 7 8 9 10 | 11 - 11 | next >
  • Kenelec Scientific Headquarters
    23 Redland Drive, Mitcham, VIC, Australia 3132
    Ph: +61 3 9873 1022
    Fax: +61 3 9873 0200
  • National Freecall No.
    1300 73 2233
  • Kenelec Scientific NSW
    Building 8, Level 2/49 Frenchs Forest Road, Frenchs Forest NSW, Australia 2086
    Ph: +61 2 8977 4017
    Fax: +61 2 8977 4000