Laser Ablation

Products > Products > Lasers & Laser Ablation > Laser Ablation

NWR-193 Laser Ablation System

  • Un-matched Video Imaging and Navigation
  • Superior Sample Handling (with fast wash-in and out)
  • Benchmark Analytical Results
  • Optical Attenuator for full energy control

NWR-213 Laser Ablation System

  • Broad Range of sample chambers optimized for each specific application
  • Higher absorption rate
  • Fast Wash in/out
  • Optical Attenuator for full energy control

NWR266 Large Beam Laser Ablation System

  • Flat, pre-calibrated spots from 30µm spots and up to > 750µm.
  • VERITM functionality for spots from 20µm to >1200µm. ICP-OES detection limits of < 1µg/g (1ppm), are possible.
  • ICP-MS detection limits of < 1ng/g (1ppb), are possible.
  • >15J/cm2 energy density. Enough to efficiently ablate glass, steel, noble metals, plastics, ceramics and biological matrices

MicroMill Sampling Prep Device

  • Sub-micron sample motion control
  • High-precision milling
  • Sample height detection and tilt correction by a drill-tip sensor
  • Sample map navigation increases sample-area field-of-view
  • 50mm of computer-driven sample movement on X, Y and Z axes
  • Sub-sampling path interpolation
  • Data/image file re-coordination, including save, recall, and export
  • New contour-following function

MIR 10 Compact Laser Ablation System

  • Gantry mounted system “floats” over stationary sample chamber; ready to use for optimal results
  • On-axis viewing and lasing at 90° to sample
  • Long working distance accommodates most sample cell designs
  • >20W minimum power to the sample, continuously adjustable for power “ramping”
  • Automated variable spot sizes below 100μm for in-situ analysis and up to 3000μm for rapid heating diffused (RHD) fusions
  • Software controlled iris “flattens” beam
  • Software control of all functions, including sample mosaic navigation function
  • Joystick control for tactile “chasing” of grains in wells
     

NWR-Femto

  • 10Hz and KhZ laser configuration
  • Available in 800, 266 or sub-200 nm wavelength
  • Spot sizes between 1μm and 100μm*
  • Energy density up to 12J/cm2 at all spot sizes*
  • *Actual size is function of wavelength and laser selection

Sample Chambers

  • UP-Platform: PaperCell, SuperCell, CryoCell, LargeFormatCell
  • NWR-Platform: Single Volume, Two Volume, LargeFormatCell,
  • Similar CFD flow as SuperCell is designed into the NWR-Platform as default configuration.
  • CryoCell is coming soon!
  • Kenelec Scientific Headquarters
    23 Redland Drive, Mitcham, VIC, Australia 3132
    Ph: +61 3 9873 1022
    Fax: +61 3 9873 0200
  • National Freecall No.
    1300 73 2233
  • Kenelec Scientific NSW
    Building 5, 49 Frenchs Forest Road, Frenchs Forest NSW, Australia 2086
    Ph: +61 2 8977 4017
    Fax: +61 2 8977 4000