Simplicity of use combined with maximum functionality, all in a pocket sized instrument, were key objectives for the development of the Castle GA213 Integrating Sound Level Meter. A feature packed, pocket instrument that is fully compliant with IEC 61672-1:2002 Class 2 and IEC 60651: 2001 Type 2. This meter gives simultaneous sound pressure (Lp) and peak (Pmax) measurement for a multitude of tasks including initial spot-check assessments to the Noise at Work Regulations 1989. It has a high-specification measurement microphone and is cased in tough, crack resistant ABS plastic.
|
Recording neighbourhood nuisance noise has always been a costly, time-consuming affair with tape storage, calibration difficulties and analysis problems afterwards. The Castle NoiseLog solves all of these problems providing a cost effective solution allowing noise complainants to record offending noises for measurement and identification, thus assisting with fast and effective dispute resolution. Following a simple set-up, the complainant is left with a single button switch to start and stop recordings instantly. The use of SD cards means recording time is only limited by the size of the card.
|
The H2 Headset Monitor is a device designed to measure the noise exposure for workers who regularly wear a headset for work. Examples such as a telephone headset or transcribing means headset wearers can be subject to noise levels above the limits set in the Control of Noise at Work Regulations 2005. The headset monitor acts as a sound level meter between the sound source and the headphones and measures the headphone noise level heard by the wearer and the background noise level of the working environment.
|
According to industrial safety law, areas subject to hazardous noise must be clearly defined, and workers notified of the danger. In most industrial settings, the noise hazard will vary throughout the premises and employees are often mobile. This is precisely where the Castle dBAlert! Personal Noise Activated Warning Unit comes into play.
|
The Castle SONUS is a new range of pocket meters designed for ease of use with the power the cover the work you need, from Noise at Work measurements to Environmental monitoring. The SONUS sound level meters are split into a range of meters to suit specific needs. Different models are split into 3 variations – Basic, Integrating and Logging – with an option for a Class 1 or Class 2 meter. Each model is packed with features designed to help you get the measurements you need, from basic sound level meter to a full logging integrating sound meter.
|
Sometimes a low cost solution for finding sound levels can be very useful, for example when alarm testing, setting up a home cinema system or other applications where the accuracy of a full compliance meter is not required. The Castle SL-8850 is ideally placed for these situations.
|
The Castle SONUS is a new range of pocket meters designed for ease of use with the power the cover the work you need, from Noise at Work measurements to Environmental monitoring. The SONUS sound level meters are split into a range of meters to suit specific needs. Different models are split into 3 variations – Basic, Integrating and Logging – with an option for a Class 1 or Class 2 meter. Each model is packed with features designed to help you get the measurements you need, from basic sound level meter to a full logging integrating sound meter.
|
The Castle SONUS is a new range of pocket meters designed for ease of use with the power the cover the work you need, from Noise at Work measurements to Environmental monitoring. The SONUS sound level meters are split into a range of meters to suit specific needs. Different models are split into 3 variations – Basic, Integrating and Logging – with an option for a Class 1 or Class 2 meter. Each model is packed with features designed to help you get the measurements you need, from basic sound level meter to a full logging integrating sound meter.
|
The Castle SONUS is a new range of pocket meters designed for ease of use with the power the cover the work you need, from Noise at Work measurements to Environmental monitoring. The SONUS sound level meters are split into a range of meters to suit specific needs. Different models are split into 3 variations – Basic, Integrating and Logging – with an option for a Class 1 or Class 2 meter. Each model is packed with features designed to help you get the measurements you need, from basic sound level meter to a full logging integrating sound meter.
|
Measuring noise really does not have to be complicated, even for the novice, and the Castle GA6224 (Class 1) and GA6226 (Class 2) Integrating Sound Level Meters are designed with this in mind. These meters are ideally equipped for carrying out Noise at Work Risk Assessments, as well as the majority of environmental survey work. The range of parameters measured, the wide measuring capability of the meters and the ease of use, mean that this equipment is suitable for anything from aircraft noise to lawnmower design, and from construction sites to laboratories.
|
