Home > Kenelec Products > Products > Accessories

Accessories

Products > Products > Accessories

Single Level Sound Meter Calibrator - GA601

Most Measurement codes of practice and good practice demand that an independent acoustic calibration of any sound level meter should be made before and after a series of measurements and the Castle GA601 provides just that facility. It produces a calibration tone of 1000Hz at a level of 94dB re 20µPa at the microphone.

Vibration Meter Calibrator - GA606

The Castle GA606 vibration calibrator is the most useful small calibrator around. Ideal for calibrations of acceleration, velocity and displacement measurement equipment. Single button operation with an auto-power off facility ensure ease of use and a long battery life.

Dual Level Sound Meter Calibrator - GA607

  • Similar to the GA601 in design, the GA607 meets the demanding standards of a class 1 calibrator
  • It features two calibration levels, 94dB and 104dB re 20µPa both at 1kHz
  • It is for use with 1/2” microphones
  • Using the GA607, a sound level meter can be checked at two meter scale points and usually on two ranges

dBdata Software for Castle Vibration Meters - PC003

Simplicity is the key to the flexibility that this software offers. Once the program is open, one mouse click is all it takes to start acquiring data from the instrument. Options are then presented to the user about how much data and which types of data to acquire thus giving control to the operator. Once the data is in the PC (a few seconds later), displaying the information in either graphical or tabular form could not be simpler. The 'explorer' pane on the left of the window shows the structure of the data and simply clicking on a data item will display either a graph or table in the right hand pane depending on the suitability of the data.

dBdataPro Software for Castle Sound Meters - PC007

Download software for use with Castle's range of sound level meters

Add-on SMARTTUNE CTA Module - 183150

SMARTTUNE™ CTA Module w/Signal Conditioner is the plug-in module for additional channels of anemometry

Single-channel SMARTTUNE Constant Temperature Anemometer - IFA300

  • SMARTTUNE automatic bridge optimization technology
  • High frequency response with no tuning
  • Built-in signal conditioner and thermocouple circuits
  • Fully computer-controlled
  • Ultra-low-noise circuits
  • Optional constant current anemometer
  • Optional integrated calibration system
  • Special 1:1 bridge for high frequency response

LASERPULSE Light Arm - Light Arm

  • Safe and accurate beam delivery
  • Experimental flexibility

StereoPIV Assembly

  • Scheimpflug mounts for focusing on the planar field at oblique viewing
  • Dual plane/dual sided calibration target for the most accurate measurements possible
  • Graduated turning stages for camera positioning

Temperature Module with Signal Conditioner - 183145

Module supplies the sensing current and signal conditioning needed to use a fine wire sensor as a resistance thermometer. Plugs into a standard TSI IFA300 research thermal anemometer.
1
2 3 | next >
  • Kenelec Scientific Headquarters
    23 Redland Drive, Mitcham, VIC, Australia 3132
    Ph: +61 3 9873 1022
    Fax: +61 3 9873 0200
  • National Freecall No.
    1300 73 2233
  • Kenelec Scientific NSW
    Building 5, 49 Frenchs Forest Road, Frenchs Forest NSW, Australia 2086
    Ph: +61 2 8977 4017
    Fax: +61 2 8977 4000