- Fast, fool-proof tester
- Helps you perform fast, easy, after-maintenance leak tests on full-face, air-purifying respirators
- Mounts easily on Model 8127 and 8130 testers
- Simply mount the respirator on the head form and scan the respirator with the hand-held probe
- Test critical areas like eye-lens seals and exhaust valves.
- If the aerosol concentration inside the mask exceeds a preset level, audible and visual alarms will be triggered
|
- 0.1 μm to 10 μm particle size range
- 1 ug/m3 to 20 mg/m3 concentration range
- 33,000 point data logging with software
- Ideal for indoor air, environmental & OH&S work
- Built-in pump, battery operated, ready to use
- Fully calibrated with a 2 year warranty
|
- 0.25 to 30 m/s wide measuring range
- Measures temperature from 0 to 60°C
- Volumetric air flows, sweep mode, 100mm head
- Air cone flow hood compatible
- USB interface, 12,700 sample data logging
- Complete with software and all accessories
|
- CO2 measurements from 0 to 5000ppm
- Precision NDIR sensor
- Statistics display and printer output
- Rugged and reliable, space age design
- Fully menu driven, easy to use
- With calibration certificate and accessories
|
- Simultaneously CO2, CO, temperature and humidity measurements
- Calculates dew point, wet bulb and percent outside air
- Large graphic display
- Displays up to 5 measurements
- On-screen messages and instructions
- Supports 12 different languages
- One instrument with multiple plug-in probe options including VOC’s and air velocity
- Store up to 39 days of data collected at one-minute log intervals
- TRAKPRO™ data analysis software provided for data logging, analysis and documenting results
- Bluetooth communications for transferring data or remote polling
|
- Computes respirator fit factor using microscopic particles in ambient air
- Fast setup and easier to use
- Use with external computer to generate reports and print fit test cards
- Measures fit factors greater than 10,000
- Stand alone operation
- Color touch screen lets you operate the instrument with a touch of your finger, a pen or stylus
- Optional mask sampling adapters allow fit testing with employee's own mask
- Automates fit testing with FitPro™ Fit Test Software
- OSHA-compliant for all respirators, except N95
- Easy upgrade to Model 8038 with built-in N95 technology
- Optional Card Printer allows you to print employee fit test cards
|
- Fit test ANY tight-fitting respirator including N95, P2 and P1 disposables
- Faster N95 fit testing time -- down from 11:30 seconds to 7:15 seconds
- Greater simplicity with the built-in N95 Companion™ technology
- Stand alone operation
- Or use with external computer to generate reports and print fit test cards
- Reduced need for an external particle generator
- Able to perform N95 fit testing with much lower ambient particle concentrations
- Color touch screen
- OSHA-compliant for all respirators, including N95
- Measures fit factors greater than 10,000
- Switch between different respirator types in under a minute
- Automates fit testing with FitPro™ Fit Test Software
- Optional Card Printer allows you to print individual fit test cards
|
- Has all the features of the TSI 5825 model
- Can be used with a velocity matrix / grid
- Measures temperature & humidity
- Advanced multi-mode LCD display
- 1000 point data logging with software
- Auto zero technology and much more
|
- Indicates the surface area of nanoparticle aerosols that deposit in the human lung corresponding to the ICRP lung deposition curves
- 10 to 1000 nm particle size range
- 1 million point data logging with software
- Fully portable, battery operated
- A great tool for the OH&S professional
|
- 10 to 1000 nm particle size range
- Obtain surface area equivalent dose of inhaled particles
- User selectable measurement modes
- Easy to use, complete with software
- Wide dynamic range & high time resolution
- Fantastic for Inhalation toxicology research
|
