- Independently verified as best performing PID technology
- Patented Fence Electrode Technology for fast, accurate humidity resistant operation
- ATEX: Zone 2 hazardous areas without safety barriers (3 wire option)
- ATEX & IECEx: Zone 1 hazardous areas with safety barriers (4 wire option)
- 3 wire option allows direct replacement of an existing PID area monitor (Zone 2 ATEX)
- Selectable detection range of 0 – 10 ppm, 0 – 100 ppm or 0 – 1000 ppm
- Diffusive monitoring - no pump required
- Scaled 4-20 mA analogue output
- Includes a 10.6 eV lamp
- Easy access PID sensor allows simple servicing
- Simple calibration procedure
|
- No radioactive detector
- No argon or other pressurised gases required
- Smart sensor technology, detachable probe
- 1 second rise and clear down
- Display units cc/sec, gm/yr and ppm
- Touch screen with help menus
- Lightweight 3 button handgun
- Data storage and printing
- No training required, switch on and go
- Rugged Pelican case exterior
- Large leaks present no contamination problems with rapid clear down
- Ultra high sensitivity with a 1 x 10-8 ml/sec HighsSense™ option
|
- Rapid, reliable and repeatable measurement of hydrogen flux
- Operates on steel up to 500 °C
- Accommodates surfaces from 3.5" diameter to flat
- Operates in any orientation, e.g. at base of pipe and vessels where corrosion commonly occurs
- Portable, light-weight
- Simple to use
- Intrinsically safe
- Totally non-intrusive
- Little or no test surface preparation needed
- No consumables such as adhesives, liquids or greases required
|
- Fixed instrument for continuous hydrogen flux measurement
- Exceptional performance without human interference
- Can be applied to steel surface up to 500 °C
- Intrinsically safe (approvals pending)
- Waterproof to IP66 (pending) to protect from heavy and driven rainfall
- Withstands harsh environments operating in ambient temperatures between -20 and 55 °C (-4 to 131 °F), in dust storms, and in environments containing volatile organics, hydrogen and humidity
- Logs flux and steel temperature data every ten minutes
|
- 7 sensor capacity
- >30 plug & play sensor choices
- Data logging to SD flash card
- Multi-function, easy to use menu
- Light weight, contoured & comfortable handheld device
- LCD displays all sensors
|
- 15 sensor capacity
- >30 plug & play sensor choices
- Extensive, easy to use menu system
- Rugged ABS enclosure with swivel handle acts as stand support
- Internal sample pump with inline filter
- Large, backlit, multi-line, LCD display
- Data logging to SD flash card
- Menu control positive sampling
|
- Single or Dual channel operation
- Rugged, drip-proof PVC enclosure
- LED indicating lights for Power, Fail, Low, High
- Through-door audible alarm c/w internal ON/OFF switch
- Two alarm relays SPDT rated 5 A @ 240 VAC
- Field adjustable alarm set points and time delays
- Temperature compensated
- 120 or 240 VAC system power
- CSA / UL electrical safety certification
- CE certification for RFI and EMI interference
|
- MS/TP BACnet communication
- Adjustable baud rate
- available 4-20 mA output signal
- optional relay
- optional LED display
- thermal resetting fuse
- LED indicator for power and alarm status
- simple calibration procedure
|
- Attractive, rugged enclosures
- Many gases detected
- Linear 4 to 20 mA output
- Power 16 to 30 VDC or 18 to 28 VAC
- Hinged, secured door
- Simple calibration procedure
- Resetting thermal fuse
- Conduit entry ports
- Optional digital display
- Optional relay
|
- Loop powered
- Power requirement 12 to 28 VDC
- Wiring: 2 conductor 18 gauge shielded
- 4-20 mA linear output signal
- Thermal resetting fuse
- LED indicator for power and alarm status
- Temperature compensation
- Automated calibration
- Calibration due notification
- Sensor self-test (CO only)
|
