Contact Us  | A-Z Index  |  Info Request  |  Newsletter  |  Rent  |  Calibration  

Occupational Health & Safety

Aerosol Monitor DustTrak II
Aerosol Monitor DustTrak II

The new TSI DUSTTRAK II Aerosol Monitors Model 8530, 8531, & 8532 are battery-operated, data-logging, light-scattering laser photometers that give you real-time aerosol mass readings. They use a sheath air system that isolates the aerosol in the optics chamber to keep the optics clean for improved reliability and low maintenance.

Suitable for clean office settings as well as harsh industrial workplaces, construction and environmental sites, and other outdoor applications. DUSTTRAK II Aerosol Monitors measure aerosol contaminants such as dust, smoke, fumes, and mists.
Download  Datasheet



Aerosol Monitor DustTrak II DRX
Aerosol Monitor DustTrak II DRX

Real-Time Dust Monitoring Takes a Giant Leap Forward!

Only the new TSI DUSTTRAK DRX Models 8533 and 8534 Aerosol Monitors can simultaneously measure both mass and size fraction - no other monitor can do both.

DUSTTRAK DRX monitors are battery operated, data-logging, light-scattering laser photometers that give you real-time aerosol mass readings. They use a sheath air system that isolates the aerosol in the optics chamber to keep the optics clean for improved reliability and low maintenance.

Suitable for clean office settings as well as harsh industrial workplaces, construction and environmental sites and other outdoor applications. DUSTTRAK DRX monitors measure aerosol contaminants such as dust, smoke, fumes and mists.
Download  Datasheet



Aerosol Monitor Environmental Enclosure
Aerosol Monitor Environmental Enclosure

The custom designed, weatherproof Environmental Enclosure protects the DUSTTRAK II and DUSTTRAK DRX Aerosol Monitor Models 8530, 8531, and 8533, TSI portable, battery-operated, laser photometers that measure and record airborne dust concentrations.

This environmental enclosure allows you to make the same accurate and precise measurements outdoors and in harsh industrial environments. The included extended-life batteries allow 24-hour operation.
Download  Datasheet



DUSTTRAK™ Aerosol Monitor Model 8520
DUSTTRAK™ Aerosol Monitor Model 8520

The DUSTTRAK Aerosol Dust Monitor is a portable, battery-operated, laser-photometer that measures and records airborne dust concentrations. Use it to measure aerosols in a wide variety of environments, from offices to industrial workplaces. With a build in data logger to suit all your dust monitoring needs.
Download  Datasheet



Environmental Enclosure DUSTTRAK™
Environmental Enclosure DUSTTRAK™

The weatherproof Environmental Enclosure protects the DUSTTRAK™ Aerosol Monitor when used outdoors and in harsh industrial environments. Primarily used in outdoor settings, the wind- and rain-proof enclosure features an extended-life battery for long-term unattended sampling.

The Environmental Enclosure comes with an omni-directional sampling inlet specifically designed to sample efficiently in a broad range of wind conditions. The inlet on the enclosure samples most efficiently from 0 to 22 mph.

The high-capacity battery included with the the enclosure permits continuous, 24-hour dust monitoring. Two high-capacity batteries are included with the enclosure, allowing one battery to be charged while the other is in operation.
Download  Datasheet



Nanoparticle Aerosol Monitor
Nanoparticle Aerosol Monitor

The AEROTRAK™ 9000 Nanoparticle Aerosol Monitor indicates the surface area of nanoparticle aerosols that deposit in the lung, corresponding to the ICRP lung deposition curves for the tracheobronchial (TB) and alveolar (A) regions of the human respiratory tract. The AEROTRAK™ 9000 monitor is a portable, battery-operated diffusion charger + electrometer with real-time surface area concentration readout and data logging capability.
Download  Datasheet



Particle Counter Ultra Fine
Particle Counter Ultra Fine

The P-Trak Ultrafine Particle Counter Model 8525 uses the same fundamental technology behind TSI's condensation particle counters (CPCs), well-proven instruments that have been used in research and industrial applications around the world for many years.

The P-Trak UPC comes with everything you need to start solving tough IAQ problems. Battery operated, it goes wherever you need to go. With programmable data logging capability, you can take the measurements back to your office for further study.
Download  Datasheet



Particle Sampler lightweight
Particle Sampler lightweight

The RESPICON™ Particle Sampler is a lightweight, compact device for measuring human exposure to airborne particle concentrations in the workplace. The RESPICON uses a single sampling head to model the human respiratory tract and simultaneously determine the three most critical particle fractions: inhalable, thoracic, and respirable. These three size fractions represent the size of particles that can penetrate progressively deeper into the respiratory system.
Download  Datasheet



Personal Monitor SIDEPAK™ AM510
Personal Monitor SIDEPAK™ AM510

The SIDEPAK™ AM510 Personal Dust Monitor for industrial hygiene and safety professionals displays and data logs concentration in real time. The rugged, belt-mountable laser photometer is compact and quiet, minimizing interference and worker discomfort. The built-in sampling pump lets you attach a wide variety of size-selective aerosol inlet conditioners for breathing zone or area measurements with a respirable cyclone or one of the three integrated impactors.
Download  Datasheet



Sampling Pump Calibrators
Sampling Pump Calibrators

TSI now offers calibrators for sampling pumps. The Model 4146 has a range of 0.01 to 20 lpm, and the Model 4046, from 2.5 to 300 lpm. These small, portable instruments are lightweight and easy to use. The continuous display of volumetric flow makes calibration adjustments fast and simple in real-time. The calibrators are temperature compensated and pressure corrected to offer volumetric flow accuracy within 2% of reading. The calibrators can be used for personal exposure sampling pumps, environmental samplers and any other instruments that draw an active sample. The compact, battery-operated design can be used easily in the field as well for periodic checks.
Download  Datasheet



Sampling Pumps Personal SIDEPAK™
Sampling Pumps Personal SIDEPAK™

You’ve been there before. You grab a sample pump fresh off the charger, set it up, and at the end of the day, you find out that the battery didn’t last the entire work shift! The whole day is wasted! Never again, if you use the SIDEPAK Personal Sampling Pumps with the Smart Battery Management System! Know how many hours of run time you’ll get before you start sampling. The built-in “gauge” in the SIDEPAK battery packs monitors battery condition and provides precise run time information in minutes.
Download  Datasheet



Kenelec Scientific Pty Ltd
ABN 88 064 373 717
23 Redland Drive, Mitcham, VIC, Australia 3132
Ph: +61 3 9873 1022 Fax: +61 3 9873 0200

Privacy   Contact   About  Links