****** VISIT
OUR NEW WEBSITE CLICK HERE
|
Listed
below are just some of the local calibration services that are available to our
clients using anemometers, air capture hoods, vane and hotwire anemometers, air
and liquid particle counters, indoor and outdoor air quality monitors and related
products. While we are obviously very dedicated to our own product brands, we
also offer verification, calibration and in some cases service facilities for
other brand instrumentation. For further information on our range of service and
calibration capabilities, please feel free to contact Mark Williams in our calibration
laboratory.
|
|
|
Flow Measuring Hoods
- The only
dedicated, professional hood calibration system of its type in Australasia
- Full calibration and multi-point
adjustment of flow measuring hoods from 0-1000 l/s
- Calibrations are done
in both supply and return modes with +/-2% accuracy
- Incorporates multiple,
high resolution NATA certified pressure transducers
- Fully temperature and
barometric pressure compensated - NATA certified
- Manned by factory trained
engineering staff with over 34 years experience
- Fully computer controlled,
firmware and software validated facility
- One of only 3 such advanced
flow hood calibration systems world-wide
- The most accurate system
of its type in the Southern Hemisphere
- Flow verified by a 3 dimensional
phase doppler flow and particle analysis system
- Control frequency and
voltage accuracy of 0.00035%
- Located in our Melbourne
head office near our technical services department
- Prompt turnaround of
air capture hoods, usually within 48 hours (nationally)
|
|
|
|
|
Hotwire Anemometers
- Full calibration of multi-point
adjustment of anemometers from 0 - 50m/s
- Extreme accuracy of down
to +/- 1% of reading - NATA Certified
- Specifically dedicated
for the precision calibration of hotwire anemometers
- Incorporates the use of
a TSI laser verified certification system
- The widest velocity calibration
range for anemometers in Australia
- Operated by factory trained,
professional engineering staff
|
|
|
Temperature,
Humidity, Dewpoint & Pressure Instruments
- Dewpoint calibration &
adjustments from -10 - +85 deg C with extreme accuracy
- Temperature calibrations
from 5 - 95 deg C with 0.03% of reading accuracy
- Humidity calibrations
from 0.5% - 99% +/- 0.5 % at 40% RH +/- 1.25% at 95% RH
- Pressure calibrations
from 0 - 35kpa with 0.025% of reading accuracy
- All of the above calibration
systems are fully NATA Certified
- Operated
by factory trained, professional engineering staff
|
|
|
Vane Anemometers
- Full calibration &
multipoint adjustments from 0.25 - 30m/s
- Accuracy is 1% of reading
or +/- 0.015m/s - NATA Certified
- Incoporates
the same advanced flow rig used for hot wire anemometers
- Fast 48
hour turn around time of TSI brand vane anemometers
- Full verification
and sometimes adjustment of other brand anemometers
- Spare parts
& repairs for all TSI and some other brand anemometers
|
|
|
Water & Liquid Particle Counters - (Now also Malvern ASL100 & Related Models)
- Full multi-point calibration
and adjustment of liquid counters & sizers
- 2um - 30um particle size
calibration range (other ranges available)
- Fully traceable to NIST
/ NATA standards
- Spare parts and full service
facilities are available
- Factory trained optical
/ electronic technicians with over 25 years experience
- Fast turn around of PMS,
Chemtrac and related instrumentation
|
|
|
Air Particle Counters & Sizers
- Full multi-point calibration
and adjustment of air counters from 0.3um - 10um
- Calibrated to NATA
standards for use in pharmaceutical and other industries
- Fast turn around time,
with loan and rental units available if required
- Spare parts, laser diodes,
optics and electronics may all be replaced locally
- Performed by experienced
optical / electronic engineering staff
|
|
|
TSI Dust Monitors / Aerosol Photometers
- Full calibration, testing,
adjustment and cleaning to NIST traceable
standards
- Accuracy of 0.001mg/m3
using the latest optical calibration techniques
- Replacement of laser diodes,
electronics and other optical components
- Calibration performed using
NIST traceable ISO certified test dust
- Fast turn around time,
with rental and loan units available in the meantime
- Calibrated using factory
trained optical / electronic engineering staff
|
|
|
Indoor Air Quality & Gas Monitoring Instruments
- Dewpoint calibration &
adjustments from -10 - +85 deg C with extreme accuracy
- Temperature calibrations
from 5 - 95 deg C with 0.03% of reading accuracy
- Humidity calibrations
from 0% - 99% with up to 1% accuracy
- CO2 calibrations from 0
to 15,000ppm
- CO calibrations from 0
to 500ppm
- Other gases also available
- All NATA Certified
|
|
|
Laserspeed Length & Speed Measuring Systems
- Calibration of non-contact
length measuring devices
- Calibration of non-contact
speed measuring devices from 0-3500 m/m
- Accuracy levels to within
+ - 0.01%
- Calibrated to NIST traceable
standards using the latest technologies
- Calibrated using factory
trained engineering staff
- Calibration of ovality,
flaw, diameter, width and thickness gauges
|
|
|
Why Send Your Instruments To Kenelec Scientific
Established in 1962, Kenelec Scientific has close to 40 years experience in the field of
optical / electronic instrumentation. Employing factory trained engineering staff and working
with the world's leading manufacturers of air and liquid particle instrumentation, we are able
to offer a wide range of professional calibration services at very competitive prices. In most
cases we are also able to have your calibration finished within 48 hours, depending on
the workload within our calibration facility. We have experience and technology to provide
our clients with the very best technical support available throughout Australasia. We also
work closely with numerous leading universities, research facilities and organisations to
ensure the best possible support network is available to our clients.
|
|
