|
 |
|
CALIBRATION
SERVICES
Listed below are just some of the local calibration services that are available
to our clients using anemometers, air capture hoods, vane and hotwire anemometers,
air and liquid particle counters, indoor and outdoor air quality monitors and
related products. While we are obviously very dedicated to our own product brands,
we also offer verification, calibration and in some cases service facilities for
other brand instrumentation. For further information on our range of service and
calibration capabilities, please feel free to contact Mark Williams or Stuart
Bunning in our calibration laboratory.
|
|
|
Flow Measuring Hoods
- The only
dedicated, professional hood calibration system of its type in Australasia
- Full calibration and multi-point
adjustment of flow hoods from 0-1000 l/s
- Calibrations are done
in both supply and return modes
- Incorporates multiple,
high resolution pressure transducers
- Temperature and barometric
pressure compensated
- Manned by factory trained
engineering staff
- One of only 3 such advanced
flow hood calibration systems world-wide
- Located in our Melbourne
head office near our technical services department
- Prompt turnaround of
air capture hoods, usually within 2-3 Days
|
|
|
| |
|
|
|
Hotwire Anemometers
- Full calibration of multi-point
adjustment of anemometers from 0 - 45m/s
- Specifically dedicated
for the precision calibration of hotwire anemometers
- The widest velocity calibration
range for anemometers in Australia
- Operated by factory trained,
professional engineering staff
|
| |
|
|
|
Temperature, Humidity, Dewpoint & Pressure Instruments
- Dewpoint calibration &
adjustments from -10 - +85 deg C
- Temperature calibrations
from -10 - 110 deg C
- Humidity calibrations
from 0.5% - 99%
- Pressure calibrations
from 0 - 35kpa
- Operated
by factory trained, professional engineering staff
|
| |
|
|
|
Vane Anemometers
- Calibration from 0.25
- 25m/s
- 2-3 day
turn around time
|
|
|
Water & Liquid Particle Counters
- Full multi-point calibration
and adjustment of liquid counters & sizers
- 2um - 30um particle size
calibration range (other ranges available)
- Fully traceable to NIST
standards
- Factory trained optical
/ electronic technicians
- Fast turn around of PMS,
Chemtrac and related instrumentation
|
| |
|
|
|
Air Particle Counters & Sizers
- Full multi-point calibration
and adjustment of air counters from 0.3um - 10um
- Calibrated to NATA
standards for use in pharmaceutical and other industries
- Fast turn around time,
with loan and rental units available if required
- NATA calibration performed
by FOTOMETRIX
|
| |
|
|
|
TSI Dust Monitors / Aerosol Photometers
- Full calibration, testing,
adjustment and cleaning to ISO standards
- Calibration performed using
ISO 12103-1 A1 test dust
- Fast turn around time,
with rental and loan units available
- Calibrated using factory
trained optical / electronic engineering staff
|
| |
|
|
|
Indoor Air Quality & Gas Monitoring Instruments
- Dewpoint calibration &
adjustments from -10 - +85 deg C
- Temperature calibrations
from -10 - 110 deg C
- Humidity calibrations
from 0% - 99%
- CO2 calibrations from 0
to 5,000ppm
- CO calibrations from 0
to 1000ppm
- Other gases also available
- All NATA Certified Gas
|
|
|
Laserspeed Length & Speed Measuring Systems
- Calibration of non-contact
length measuring devices
- Calibration of non-contact
speed measuring devices
- Calibrated to NIST traceable
standards
- Calibrated using factory
trained engineering staff
|
|
|
|
Kenelec
Scientific Pty Ltd
ABN 88 064 373 717
23 Redland Drive, Mitcham, VIC, Australia 3132
Ph: +61 3 9873 1022 Fax: +61 3 9873 0200
Privacy Contact
About Links
|
|
|
|
